Guide rail lift platform

1. Anti-fall protection: the mechanical anti-pendant will protect the platform + (4 security Settings)
2. Balance protection: the steel wire rope and the roller supporting make the table balance rise and fall
3. Emergency protection: equipped with emergency descending device when the power is off.
4. Standard mismatch protection and power failure emergency protection device
5. Lack of phase overheat protection: ac contactor/thermal relay (motor overheating protection)
6. Adopt high quality imported seals: Japan -NOK
7. Buttons, travel switches and intermediate relays are used in France schneider electric/Japan zidane
8. Up to 20 meters, the designated limit position will stop automatically
9. H-type national standard rail steel, four track card slots, to ensure long-term operation of stable
10. Four high strength fixed derrick: stronger and safer [optional]
11. The derrick door is equipped with safety device that can be operated by the door 12. Anti-collision spring: effectively slow down the landing noise
13. Motor: far east [standard match], Siemens bay [optional]
14. The panel adopts 304 stainless steel control panel, and the appearance is of high quality [standard match]
15. PLC linkage control + elevator display control panel [optional]
14. Safe electromagnetic lock for open doors
15. Chrome plated high-strength piston rod, permanent non-deformation
16. No digging hole or just digging 200mm deep
17. After installation, the demander shall build a rain-proof shed [for outdoor machines]

Mobile boarding bridge

Load 6T\8T\10T [standard], 15T\20T [customized]
1. Fixed hydraulic support leg: the loading and unloading process is more stable [optional]
2. Anti-collision mat [optional]
3. Lip plate: connect with the carriage to be more in place, loading and unloading freely
4. Lock the chain in case the bridge and carriage shift
5. Solid wear-resistant tire with long service life
6. Brake pad: to prevent the shift of equipment when used, safe and reliable
7. Good performance manual hydraulic system
8. Product surface anti-skid mesh design, no deformation, anti-slip density: 30*25*30mm
9. Tail folding transition plate, folding and adjusting required height
10. Forklift traction.

Shear-fork hydraulic lift platform (indoor)

1. The panel adopts 304 stainless steel control panel, and the appearance is of high quality [standard match]
2. PLC linkage control + elevator display control panel [optional]
3. Platform protection: guardrail type and guard net type
4. Make the lifting platform run more stable guide rail
5. Four high strength fixed derrick: safe, stable and stable
6. High quality seal for oil cylinder: Japan -NOK
7. Chrome plated high-strength piston rod, permanent non-deformation
8. High strength manganese steel shear fork arm, bearing large, not deformation
9. Standard mismatch protection and power failure emergency protection device
10. The pin axis is 45# carbon round steel, which has good abrasion resistance
11. The travel switch and intermediate relay are adopted by France schneider electric/Japan zoe
12. Equipped with power failure emergency reduction device
13. Motor: far east [standard match], Siemens bay [optional]
14. The rotating parts are fully equipped with wear resistant copper sleeve.

Aluminum alloy high-altitude operation platform

1. Oil cylinder adopts high quality imported seals: Japan -NOK
2. The table is made of anti-skid board or anti-skid sand
3. Power configuration: ac 220V [standard match] Manual, dc, ac/dc [customized]
4. The guide wheel sliding block device of the special mast column is stable and smooth.
5. High strength aluminum alloy, beautiful and durable
6. Chromium plated high-strength piston rod, permanent non-deformation
7. The chassis materials are of high quality steel: Shanghai baosteel
8. Four anti-wear polyurethane wheels, strong and durable
9. Double protection support leg structure, operation safety and reliability
10. Paint: special paint for cars
11. Light weight, portable device, single operation
12. Small equipment size, can enter the elevator and other small space, to different heights.

Special customized lifting platform

1. Table: anti-slip decorative plate, flat plate [optional]
Railing, ball, roller, inclinable, rotatable, stainless steel countertops [customized]
2. Chromium plated high-strength piston rod, permanent non-deformation
3. The pin axis is 45# carbon round steel, which has good abrasion resistance
4. Equipped with power failure emergency reduction device
5. Hook: the overall handling of convenient equipment
6. High quality seal for oil cylinder: Japan -NOK
7. The base is fixed with the ground and the safety is stable
8. High strength manganese steel shear fork arm, bearing large, not deformation
9. The travel switch and intermediate relay are adopted by France schneider electric/Japan zoe
10. Standard mismatch protection and power failure emergency protection device
11. The rotating parts are fully equipped with wear resistant copper sleeve.

Mobile cutting fork type high-altitude operating platform (standard machine)

1. The safety operation guarantee of the table:
1. 1.1 meters high standard with four-sided guardrail, to prevent the staff from overreaching the surface;
The table has 2 clasps, and the high altitude operation is connected with the safety rope.
The table is surrounded by a baffle and a small tool box to prevent parts and tools from falling.
The anti-skid decorative board table, wide operation platform, wide operation scope
2. Base toolbox: the random tool can be placed, which can meet the quick maintenance needs
3. Simple ladder: easy for workers to be safe and easy up and down platform
. 4. High strength manganese steel shear fork arm, bearing large, high hardness, no deformation
5. Chromium plated high-strength piston rod, permanent non-deformation
6. The pin axis is 45# carbon round steel, with high strength and abrasion resistance
7. High quality seal for oil cylinder: Japan -NOK
8. Adjust the horizontal bead and adjust the supporting leg to ensure the horizontal stability
9. Use 400-8,500-8,600-9 wear-resistant tires
10. Equipped with power failure emergency reduction device
11. Switch and intermediate relays are used by France schneider electric/Japan zoe
12. Power configuration: ac 380V
Dc, ac dc, ac 220V, hand power [customized]
13. Standard mismatch protection and power failure emergency protection device
14. The countertop is equipped with a handheld button to facilitate the operation of the operator.

Copyright 2017 Suzhou LDG machinery equipment co., LTD. All rights reserved by Su ICP 11019929.

Suzhou LDG machinery equipment co., LTD.
Su ICP 11019929

Products